Product Description
Our double-wide industrial safety gates are designed to accommodate openings between 3 and 6 feet across and can be cut on-site to your exact specifications. The double gate allows for your pallet and/or forklifts to move through, and once it's moved, the gates automatically close behind it.
The Right Gate for Large Applications
The double gate avoids having a large gap between the hazard and the worker if a large single gate is used. With its individually swinging doors, the double-wide gate can swing in the same or opposite directions for your particular application. The double gate works perfectly when swing clearance is limited. A 6 ft double gate would only need 3 ft of clearance, whereas a single gate would need 6 ft.
Close-Up on Heavy-Duty Hinge
Created for Compliance
Have peace of mind when walking through your gate. Kee Gate comes with a self-closing spring to ensure OSHA compliance.
Easily Adjusted
Rest assured that your gate will swing closed where it needs to. The adjustable tension on each Kee Gate adapts to almost any orientation.
Tested for Longevity
No need to worry about constantly replacing your gate springs. The Kee Gate spring was tested to 50,000 actuations.
Close-Up on Universal Mounting Components
Adaptable Design
With its universal design, Kee Gate can attach to most flat iron, square or round tube between 1”-1.5” in diameter. Use the plate on the gate and mount directly to a flat surface or wall.
Simple Hardware
Effortlessly connect Kee Gate with just a U-bolt and a combination of washers and nuts.
Kee Gate Installation
This product is safety critical. This product must only be used by a competently trained individual. Read the instructions for use completely before using this product.
Product Instructions
Additional Documents
Additional Information
| SKU | SGDBPEUXX |
|---|---|
| Manufacturer | Kee Safety |
| Compliance | OSHA 1910.23, OSHA Standards |
| Finish | Hot Dip Galvanized |
| Dimensions (in.) | Min: 24" Max: 72" |
| Hinge Style | Fully Adjustable Barrel |
