- Tested for 50,000 closures without failure
- Salt spray tested for over 200 hours to assess corrosion performance
Product Description
Kee Gate's pre-cut self-closing safety gates are a fast, easy way to achieve safe access points as well as OSHA compliance. Our self-closing gates are all spring-loaded. The industrial gates automatically close when the worker lets go to ensure entryways are blocked off when not in use and to prevent workers from accidentally entering an area with a fall hazard.
Sizes ranging from 18 to 48 in. with the adjustability of minus 1.5 in and plus 2.0 in. All finishes are corrosion-resistant. Available in aluminum, hot-dipped galvanized, and powder-coated safety yellow.
Designed for Safety and Access Control
Keep your workers safe with permanent gate protection where regular access for maintenance and inspection is required. Self-closing gates avoid accidentally leaving a gate open for a worker to enter a dangerous area. The system does not require the worker to replace a bar or relatch the chain. A self-closing gate has a top rail, mid-rail, and the gate can include a base plate if needed.
Chains are no longer OSHA compliant. OSHA 1910.29 (b)(13)(i)
The Right Gate for Your Application
Whether you need permanent hazard protection internally or externally, these heavy-duty industrial gates went through thorough testing to ensure safety and durability to withstand heavy usage. The industrial gate works perfectly for ladders, railing, platforms, and access points.
Keep Productivity Up with Easy Installation
With easy, simple installation, you can keep downtime to a minimum. The standard self-closing gates are pre-cut to save you time on installation and no special tools required. These OSHA-compliant safety gates use a U-bolt that clamp onto most existing rails and can be adjusted for a perfect fit.
Kee Gate's Pre-Cut Sizes
| Gate Size | Min (in) | Mid (in) | Max (in) |
|---|---|---|---|
| 18" Gate | 16.5 | 18 | 20 |
| 21" Gate | 19.5 | 21 | 23 |
| 24" Gate | 22.5 | 24 | 26 |
| 27" Gate | 25.5 | 27 | 29 |
| 30" Gate | 28.5 | 30 | 32 |
| 33" Gate | 31.5 | 33 | 35 |
| 36" Gate | 34.5 | 36 | 38 |
| 40" Gate | 38.5 | 40 | 42 |
| 48" Gate | 46.5 | 48 | 50 |
Close-Up on Heavy-Duty Hinge
Created for Compliance
Have peace of mind when walking through your gate. Kee Gate comes with a self-closing spring to ensure OSHA compliance.
Easily Adjust the Tension
Rest assured that your gate will swing closed where it needs to. The adjustable tension on each Kee Gate adapts to almost any orientation. Use a pair of wrenches to get your desired tension quickly.
Tested for Longevity
No need to worry about constantly replacing your gate springs. The Kee Gate spring has life cycle tested for 50,000 closures without failure.
Close-Up on Universal Mounting Components
Adaptable Design
With its universal design, Kee Gate can attach to most flat iron, square or round tube between 1”-1.5” in diameter. Use the plate on the gate and mount directly to a flat surface or wall.
Simple Hardware
Effortlessly connect Kee Gate with just a U-bolt and a combination of washers and nuts.
How to Install the Kee Safety Self-Closing Gate
This product is safety critical. This product must only be used by a competently trained individual. Read the instructions for use completely before using this product.
Product Instructions
Additional Information
| SKU | keegate-config |
|---|---|
| Manufacturer | Kee Safety |
| Compliance | OSHA 1910.23, OSHA 1910.29 |
| Hinge Style | Fully Adjustable Barrel |
