Universal Industrial Safety Gate - Openings 15"- 44"

Starting Price: $310.59

Configuration

Typically ships in
2 Business Days

Price as configured: $0.00

plus minus
Model: SGNA500XX

Product Description

Kee Safety's universal self-closing gate fits openings from 15 to 44 in. wide. The safety gate can be easily adjusted on-site to fit the opening. The fittings and hinge parts are hot-dipped galvanized. It is a fast, easy way to achieve safe access points as well as OSHA compliance. Available in hot-dipped galvanized and can be powder-coated in safety yellow of visibility.


self closing gate

Self-Closing Gate for Permanent Protection

Keep your workers safe with permanent gate protection where regular access for maintenance and inspection is required. Self-closing gates avoid accidentally leaving a gate open for a worker to enter a dangerous area. The system does not need the worker to replace a bar or relatch the chain.

Chains are no longer OSHA compliant. OSHA 1910.29 (b)(13)(i)

The Versatile Gate for Your Facility's Access Points

With its universal sizing design, you can protect all access points in your facility with one type of gate. Whether you need permanent hazard protection internally or externally, these heavy-duty industrial gates went through thorough testing to ensure safety and durability to withstand heavy usage. The industrial gate works perfectly for ladders, railing, platforms, and access points.

  • Tested for 50,000 closures without failure
  • Salt-spray tested for over 200 hours to assess corrosion performance
universal industrial gates
safety gate

Compliance in Under 30 Minutes

With easy installation, you can keep downtime to a minimum. Kee Safety's Universal Gate comes fully assembled and only mounting required. Just cut the gate to your desired size with a hacksaw on site for precise alignment if opening measurement is between 15" and 44". No welding. These OSHA-compliant safety gates use a U-bolt that clamp onto most existing rails and can be adjusted for a perfect fit.

Watch the step-by-step gate installation video.

Close-Up on Heavy-Duty Hinge

Created for Compliance

Have peace of mind when walking through your gate. Kee Gate comes with a self-closing spring to ensure OSHA compliance.

Easily Cut On Site

Protect your access points with one SKU. Kee Gate is designed to be cut-to-size by a hacksaw on site for precise alignment if opening measurement is less than 44".

Tested for Longevity

Rest assured that your gate will swing closed where it needs to. No need to worry about constantly replacing your gate springs. The Kee Gate spring was tested to 50,000 actuations.

Close-Up on Universal Mounting Components

Adaptable Design

With its universal design, Kee Gate can attach to most flat iron, square or round tube between 1”-1.5” in diameter. Use the plate on the gate and mount directly to a flat surface or wall.

Simple Hardware

Effortlessly connect Kee Gate with just a U-bolt and a combination of washers and nuts.

Universal Gate Installation Video

This Product is OSHA Compliant

This product is safety critical. This product must only be used by a competently trained individual. Read the instructions for use completely before using this product.

Standards

OSHA 1910.23
link
OBC
NBC

Additional Information

SKU SGNA500XX
Manufacturer Model Number N/A
Manufacturer Kee Safety
Compliance N/A
Dimensions (in.) Min: 18" Max: 44"
Hinge Style Fully Adjustable Barrel
Shopping Cart

Show Pricing

Option available in footer.