- Clear visibility: The open lattice design keeps the trench visible at all times, enabling easy inspection without removing the CoverSafe Trench Cover.
- Physical protection: The CoverSafe Trench acts as a secure barrier, providing a reliable layer of safety between workers and the hazard below.
- Quick accessibility: When access to the trench is required, the cover is easily moved, letting teams enter and exit efficiently.
- Enhanced stability: The CoverSafe Trench can be clipped down to stay firmly in place even in busy or high-traffic areas.
- Material: Reinforced plastic resin
- Closed: 4.9 ft. (L) x 10.2 in. (W) x 1.5 in. thick
- Open (optimum): 6 ft. 5 in. (L) x 3 ft. 11 in. (W) x 1.5 in. thick
- Max Trench Span: 3 ft.
- Weight: 14 lbs.
- Requires support on only two sides with 5.5 in. of overhang on each side.
- Manufacturer: Oxford Safety Components
- SKU: OSCTR001
- Material: Reinforced plastic resin
- Closed: 6 ft. 10 in. (L) x 10.2 in. (W) x 1.5 in. thick
- Open (optimum): 6 ft. 5 in. (L) x 5 ft. 5 in. (W) x 1.5 in. thick
- Max Trench Span: 4 ft. 3 in.
- Weight: 28 lbs.
- Requires support only on two sides with 5.5 in. of overhang on each side.
- Manufacturer: Oxford Safety Components
- Single unit (SKU OSCTR001): $926.65 each
- Buy 5: $889.58 each — save 5%
- Buy 21: $861.78 each — save 8%
- Buy 100: $815.45 each — save 13%
Product Description
CoverSafe Trench Cover — Trenching & Excavation Fall Protection
The CoverSafe Trench Cover is a portable, OSHA-compliant fall protection system engineered to cover open trenches and excavations on construction and roadwork jobsites.
Unlike solid boards, warning tape, or temporary fencing, the CoverSafe Trench sits directly over the opening as an expandable lattice platform — creating a walk-over barrier that adapts to trench sizes up to 4'3" wide while keeping the excavation fully visible for inspection.
Available in two lightweight sizes (14 lb Mini and 28 lb Regular), the CoverSafe Trench is the trench cover of choice for roadwork crews, utility contractors, and general construction sites where OSHA 29 CFR 1926.501 fall prevention is required. Its open lattice structure lets supervisors and inspectors monitor trench conditions without removing the cover — safety and accessibility in one product.
OSHA-Compliant Fall Protection
Prevent falls into open trenches and excavations with a secure, walk-over platform that meets OSHA 1926.502(i) cover requirements.
Expandable Lattice Design
The expandable CoverSafe Trench fits a wide range of trench sizes — Mini up to 3 ft, Regular up to 4'3" — while remaining easy to set up and reposition.
Lightweight & Portable
The CoverSafe Trench comes in two lightweight sizes at 14 and 28 lbs. — easy for a single worker to move across the jobsite.
Maintain Trench Visibility
The open lattice design lets supervisors and inspectors monitor the trench without removing the CoverSafe Trench Cover.
Advantages of the CoverSafe Trench Cover
Versatile Fall Protection with the CoverSafe Trench
The CoverSafe Trench Cover is specifically engineered to protect construction workers from accidentally stepping or falling into open voids. Unlike traditional solutions such as solid boards, plywood sheets, or warning signage, the CoverSafe Trench offers several key advantages:
Lightweight, Expandable CoverSafe Trench Cover
The CoverSafe Trench is a lightweight, expandable trench cover that prevents accidental falls into open trenches and excavations on construction and roadwork sites.
Easy to transport and install, the CoverSafe Trench is a sturdy temporary platform that adapts to a wide range of trench sizes while maintaining full visibility for inspections.
Its open lattice design combines safety and accessibility, making the CoverSafe Trench a practical choice for roadwork crews, utility contractors, and any construction site where worker fall protection is required.
Durable CoverSafe Trench for Excavations and Roadwork
The CoverSafe Trench Cover is a robust fall protection solution engineered to prevent accidental falls into open trenches and excavations across demanding jobsite conditions.
Built with strength and durability in mind, the CoverSafe Trench provides a sturdy temporary platform that withstands the demands of busy construction and roadwork environments. Unlike makeshift barriers, the CoverSafe Trench system resists heavy use, delivering long-lasting reliability on site.
Its lattice design not only creates a secure barrier over hazardous openings but also maintains full visibility for easy inspections — combining toughness with practicality to keep workers safe and projects moving forward.
CoverSafe Trench Cover — Technical Details
CoverSafe Trench Mini
CoverSafe Trench Regular
Ordering & Volume Discounts
Pricing shown is for SKU OSCTR001. See the product page for current pricing and other sizes.
Buy the CoverSafe TrenchSafe Use on Site
This product is safety critical. The CoverSafe Trench must only be used by a competently trained individual. Read the instructions for use completely before deploying the cover on site.
Once positioned, clip the cover down so it cannot be displaced by wind, equipment, or foot traffic, in line with OSHA 1926.502(i)(3).
OSHA Compliance with the CoverSafe Trench
The CoverSafe Trench Cover is engineered to meet OSHA 29 CFR 1926.502(i) requirements for covers used over holes in walking/working surfaces on construction sites. Below are the specific regulations the CoverSafe Trench addresses:
Covers: Covers for holes in floors, roofs, and other walking/working surfaces shall meet the following requirements:
1926.502(i)(1): Covers located in roadways and vehicular aisles shall be capable of supporting, without failure, at least twice the maximum axle load of the largest vehicle expected to cross over the cover.
1926.502(i)(2): All other covers shall be capable of supporting, without failure, at least twice the weight of employees, equipment, and materials that may be imposed on the cover at any one time.
1926.502(i)(3): All covers shall be secured when installed so as to prevent accidental displacement by the wind, equipment, or employees.
1926.502(i)(4): All covers shall be color coded or they shall be marked with the word "HOLE" or "COVER" to provide warning of the hazard.
Note: This provision does not apply to cast iron manhole covers or steel grates used on streets or roadways.
CoverSafe Trench — Frequently Asked Questions
Is the CoverSafe Trench OSHA-compliant?
Yes. It is engineered to meet OSHA 29 CFR 1926.502(i) requirements for covers over holes in walking/working surfaces, and supports trench and excavation fall prevention under 29 CFR 1926.501.
What trench widths does it cover?
The Mini spans trenches up to 3 ft. and the Regular spans up to 4 ft. 3 in. Both rest on solid ground on two sides with 5.5 in. of overhang on each side.
What is it made of?
Reinforced plastic resin — tough enough for busy jobsites while staying light enough for one worker to reposition.
How heavy is each cover?
The Mini weighs 14 lbs. and the Regular weighs 28 lbs., so a single worker can carry and set either size without lifting equipment.
How is the cover held in place?
It sits over the opening and can be clipped down so it stays put in high-traffic areas and cannot be displaced by wind, equipment, or workers — meeting OSHA 1926.502(i)(3).
Can we inspect the trench without removing it?
Yes. The open lattice design keeps the excavation fully visible, so supervisors and inspectors can monitor trench conditions without lifting the cover.
Who uses the CoverSafe Trench?
Roadwork crews, utility contractors, and general construction sites that need a portable, reusable alternative to plywood, solid boards, warning tape, or temporary fencing.
How is it different from plywood or boards?
Unlike a solid cover, it expands to fit a range of trench sizes, keeps the trench visible for inspection, lifts away quickly for access, and clips down for a secure walk-over barrier.
This product is safety critical. This product must only be used by a competently trained individual. Read the instructions for use completely before using this product.
Additional Information
| SKU | OSCTR001 |
|---|---|
| Manufacturer | Oxford Safety Components |
